Factory source Stainless Stamping - 409,409L,410 ,410S,420,420J2,430 stainles steel pipe – Charming Metal
Factory source Stainless Stamping - 409,409L,410 ,410S,420,420J2,430 stainles steel pipe – Charming Metal Detail:
Description
400 series stainless steel pipe is used widely, The 400 series stainless steel is an alloy of iron, carbon alloy chromium.
Specification
| Grade | 409,409L,410 ,410S,430 |
| Standard | ASTM A240 |
| Thickness | 0.2-10.0mm |
| Width | 600mm min |
| Length | 2000mm-8000mm or as customers’ request |
| Surface finish | NO1,No.4,2B, BA, 6K, 8K, Hair Line with PVC |
Specification of 420 and 420J2 hardened tempered stainless
| Grade | 420 ,420J2 hardened tempered stainless |
| Standard | ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165, BS 1449, DIN17460, |
| Thickness | 0.1-1.0mm |
| Width | 5.56mm,6mm,7.2mm,11mm,107mm,118mm,185mm |
| Length | 2000mm-8000mm or as customers’ request |
| Hardness | HV500-560 |
| Surface finish | Bright |
| Camber | 1.2mm/1mm |
| Curl | Max 15mm/1mm |
| Chemical Comproperties | C:0.26-0.4% Aim:0.3%Cr:12-14% Aim:13% |
Chemical Composition
| Grade | C | Si | Mn | P≤ | S≤ | Cr | Mo | Ni | Other |
| 409 | ≤0.03 | ≤1.00 | ≤1.00 | 0.04 | 0.03 | 10.5-11.7 | - | ≤0.6 | Ti=6×C%~0.75 |
| 410 | ≤0.15 | ≤1.00 | ≤1.00 | 0.04 | 0.03 | 11.5-13.5 | - | - | - |
| 410S | ≤0.08 | ≤1.00 | ≤1.00 | 0.04 | 0.03 | 11.5-13.5 | - | - | - |
| 420 | ≤0.15 | ≤1.00 | ≤1.00 | 0.04 | 0.03 | 12.0-14.0 | - | - | - |
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | 0.04 | 0.03 | 16-18 | - | ≤0.4 | - |
Machenical performance
| Grade | YS(Mpa) ≥ | TS (Mpa) ≥ | El (%) ≥ | Hardness(HV) ≤ |
| 409 | 175 | 360 | 20 | 150 |
| 410 | 200 | 440 | 20 | 145 |
| 410S | 200 | 410 | 20 | 145 |
| 430 | 200 | 450 | 25 | 145 |
Application
| Grade | Application |
| 409 | Automobile exhaust pipe, silencer |
| 410 | Flat springs, knives, kitchen utensils and hand tools |
| 420 | Cutting tool, measuring tool, dental and surgical instruments, pump shafts, plastic molds and dies, steel balls, scissors, gear shafts,cams, pivots, Lens molds |
| 430 | Sinks, sink rims, appliance trim, counter tops, dish washers, range hoods, flatware, architectural uses, roofing, siding and restaurant equipment. |
400 series stainless steel can be used in these industries
Product detail pictures:
Related Product Guide:
Exfoliated MoS2 Sheets and Reduced Graphene Oxide-An Excellent and Fast Anode for Sodium-ion Battery | Aisi 304 Stainless Steel Coil
This Australian made hardtail uses 3D printing to make its exquisite steel frame | Aisi 304 Stainless Steel Coil
It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for Factory source Stainless Stamping - 409,409L,410 ,410S,420,420J2,430 stainles steel pipe – Charming Metal, The product will supply to all over the world, such as: Hamburg , venezuela , Senegal , We've got constantly insisted on the evolution of solutions, spent good funds and human resource in technological upgrading, and facilitate production improvement, meeting the wants of prospects from all countries and regions.
By Maud
from Ghana
- 2015.06.09 12:42
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Debby
from Egypt
- 2016.11.20 15:58
