Bottom price Stainless Steel 304 Or 316 Pipe Fiittings And Flange Elbow Tee For Industry
To be able to ideal meet up with client’s needs, all of our operations are strictly performed in line with our motto “High High-quality, Competitive Cost, Fast Service” for Bottom price Stainless Steel 304 Or 316 Pipe Fiittings And Flange Elbow Tee For Industry, Welcomes all overseas friends and retailers to determine collaboration with us. We’ll offer you with truthful, premium quality and economical services to fulfill your needs.
To be able to ideal meet up with client’s needs, all of our operations are strictly performed in line with our motto “High High-quality, Competitive Cost, Fast Service” for 90 Degree 6061 1060 Aluminum Elbow, Gi Pipe Fitting Bend 45 Degree, Stainless Steel Pipe Elbow Dimensions 22.5 Degree, Our company insists on the purpose of “takes service priority for standard, quality guarantee for the brand, do business in good faith, to provide expert, rapid, accurate and timely service for you”. We welcome old and new customers to negotiate with us. We will serve you with all sincerity!
| Thickness | 0.15mm-2.0mm |
| Thickness tolerance | +/- 0.02mm |
| Width | 600mm-1250mm |
| Width tolerance | +/-2mm |
| Zinc coating | Z40-Z275 AZ30-AZ150 |
| Color | Grey white, sea blue, red or any RAL standard |
| Painting | Top:20+-5um Back:5μm—8μm |
| Standard | ASTM, AISI, DIN, GB,JIS |
| Material | SGCC,SGCD,SECC,SECD,DX51D+Z, S350GD, S450GD, S550GD |
| Technique | Cold rolled, hot-dipped galvanizing, color coated, galvanized, galvalume |
| Spangle | Zero spangle, regular spangle or normal spangle |
| Surface Structure | Galvanized, galvalume, zero spangle, regular spangle or normal spangle |
| Surface treatment | Chromate and oiled, chromate and non-oiled |
| Packing | Export standard, or according to client requirement |
| Min order | 500 tons |
| Coil weight | 3-6tons or as client requirement. |
| Coil ID | 508/610mm
|
Chemical Composition
| Grade | C | Si | Mn | P≤ | S≤ | Cr | Mo | Ni | Other |
| 409 | ≤0.03 | ≤1.00 | ≤1.00 | 0.04 | 0.03 | 10.5-11.7 | - | ≤0.6 | Ti=6×C%~0.75 |
| 410 | ≤0.15 | ≤1.00 | ≤1.00 | 0.04 | 0.03 | 11.5-13.5 | - | - | - |
| 410S | ≤0.08 | ≤1.00 | ≤1.00 | 0.04 | 0.03 | 11.5-13.5 | - | - | - |
| 420 | ≤0.15 | ≤1.00 | ≤1.00 | 0.04 | 0.03 | 12.0-14.0 | - | - | - |
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | 0.04 | 0.03 | 16-18 | - | ≤0.4 | - |
Mechanical Properties
| Grade | YS(Mpa) ≥ | TS (Mpa) ≥ | El (%) ≥ | Hardness(HV) ≤ |
| 409 | 175 | 360 | 20 | 150 |
| 410 | 200 | 440 | 20 | 145 |
| 410S | 200 | 410 | 20 | 145 |
| 430 | 200 | 450 | 25 | 145 |
| Grade | Application |
| 409 | Automobile exhaust pipe, silencer |
| 410 | Flat springs, knives, kitchen utensils and hand tools |
| 420 | Cutting tool, measuring tool, dental and surgical instruments, pump shafts, plastic molds and dies, steel balls, scissors, gear shafts,cams, pivots, Lens molds |
| 430 | Sinks, sink rims, appliance trim, counter tops, dish washers, range hoods, flatware, architectural uses, roofing, siding and restaurant equipment. |
