301, 304, 304L, 316, 316L, 309 S, 310, 321 stainless hlau bar
Specification
| Qib | 301, 304, 304L, 316, 316L, 309 S, 310, 321 |
| Txuj | ASTM A240, JIS G4304, G4305, GB / T 4237, GB / T 8165, BS 1449, DIN17460, DIN 17441 |
| Txoj kab uas hla | Raws li cov neeg siv khoom xav tau |
| Ntev | 1000mm-8000mm los yog raws li cov neeg siv khoom thov |
| Nto tiav | NO1, No.4,2B, BA, 6K, 8K, Plaub Kab nrog PVC |
Tshuaj muaj pes tsawg leeg
| Qib | C | Si | Mn | P≤ | S≤ | Cr | Mo | Ni | Lwm yam |
| 301 | ≤ 0.15 | ≤ 1.00 | ≤ 2.00 | 0.045 ib | 0.03 ib | 16-18 | - | 6.0 | - |
| 304 | ≤ 0.07 | ≤ 1.00 | ≤ 2.00 | 0.035 ib | 0.03 ib | 17-19 | - | 8.0 ib | - |
| 304l ua | ≤ 0.075 | ≤ 1.00 | ≤ 2.00 | 0.045 ib | 0.03 ib | 17-19 | - | 8.0 ib | ? |
| 309s ua | ≤ 0.08 | ≤ 1.00 | ≤ 2.00 | 0.045 ib | 0.03 ib | 22-24 | - | 12.0 Nws | - |
| 310 | ≤ 0.08 | ≤1.5 | ≤ 2.00 | 0.045 ib | 0.03 ib | 24-26 | - | 19.0 Nws | - |
| 316 | ≤ 0.08 | ≤ 1.00 | ≤ 2.00 | 0.045 ib | 0.03 ib | 16-18.5 Nws | 2 | 10.0 | - |
| 316l ua | ≤ 0.03 | ≤ 1.00 | ≤ 2.00 | 0.045 ib | 0.03 ib | 16-18 | 2 | 10.0 | - |
| 321 | ≤ 0.12 | ≤ 1.00 | ≤ 2.00 | 0.045 ib | 0.03 ib | 17-19 | - | 9.0 ib | Ti ≥5 × C |
| Qib | YS(Mpa) ≥ | TS (Mpa) ≥ | El (%) ≥ | Hardness (HV) ≤ |
| 301 | 200 | 520 | 40 | 180 |
| 304 | 200 | 520 | 50 | 165-175 : kuv |
| 304l ua | 175 | 480 | 50 | 180 |
| 309s ua | 200 | 520 | 40 | 180 |
| 310 | 200 | 520 | 40 | 180 |
| 316 | 200 | 520 | 50 | 180 |
| 316l ua | 200 | 480 | 50 | 180 |
| 321 | 200 | 520 | 40 | 180 |
?
?
?
?
?
Daim ntawv thov
- Aerospace
- Cov Chaw Pabcuam Hlau
- Nuclear
- Marine/Shipbuilding
- Kev ua tshuaj lom neeg
- Roj & Roj
- Khoom noj khoom haus / Tsev noj mov
- Motorsports
- Tsoom fwv/tub rog
- Pumps & Valves
- Machined Fabricated Cheebtsam
- Fais fab faib
- Fabricator
