الفولاذ المقاوم للصدأ بار / رود

  • 409، 409L، 410،410S، 430 بار الفولاذ المقاوم للصدأ

    409، 409L، 410،410S، 430 بار الفولاذ المقاوم للصدأ

    Specification Grade 409, 409L, 410,410S,430 Standard ASTM240 Diameter As customers requirement Length 1000mm-8000mm or as customers’ request Surface finish NO1,No.4,2B, BA, 6K, 8K, Hair Line with PVC Chemical Composition Grade C Si Mn P≤ S≤ Cr Mo Ni Other 409 ≤0.03 ≤1.00 ≤1.00 0.04 0.03 10.5-11.7 - ≤0.6 Ti=6×C%~0.75 410 ≤0.15 ≤1.00 ≤1.00 0.04 0.03 11.5-13.5 - - - 410S ≤0.08 ≤1.00 ≤1.00 0.04 0.03 11.5-13.5 - - - 420 ≤0.15 ≤1.00 ≤1.00 0.04 0.03 12.0-14.0 - - - ...
  • 926 غير القابل للصدأ ورقة الصلب / شريط / الأنابيب

    926 غير القابل للصدأ ورقة الصلب / شريط / الأنابيب

    Equivalent designations UNS N08926 DIN W. Nr. 1.4529 Form ASTM Rod, bar and wire B 649 Plate, sheet and strip A 240, A 480, B 625, B 906 Seamless pipe and tube B 677, B 829 Welded pipe B 673, B 775 Welded tube B 674, B 751 Welding fitting B 366 Billet and bar for reforging B 472 Chemical composition % Fe Ni Cr Mo C Mn Si P S Cu N min balance 24.0 19.0 6.0 0.5 0.15 max 26.0 21.0 7.0 0.020 2.0 0.50 0.030 0.010 1.5 0.25 Physical propertie...
  • INVAR 36 ورقة / شريط / الأنابيب

    INVAR 36 ورقة / شريط / الأنابيب

    Equivalent designations UNS K93600 W. Nr. 1.3912 Form ASTM Sheet and strip B 388, B 753 Chemical composition % Fe Ni C Mn Si P S Co Cr min balance 35 max 37 0.15 0.60 0.40 0.025 0.025 0.50 0.25 Physical properties Density 8.11 g/cm3 Melting point 1430℃ Features: Invar 36 is a 36% nickel-iron alloy notable for its uniquely low coefficient of thermal expansion which is roughly one-tenth that of carbon steel in the range from room temperatu...
  • شريط 201202 الفولاذ المقاوم للصدأ

    شريط 201202 الفولاذ المقاوم للصدأ

    Chemical composition of 200 series stainless steel Grade C (Max) Mn (Max) P (Max) S (Max) Si (Max) Cr Ni Mo Nitrogen (Max) Cu/ Others 201 0.15 5.50-7.50 0.06 0.03 1 16.00-18.00 3.50-5.50 - 0.25 202 0.15 7.50-10.00 0.06 0.03 1 17.00-19.00 4.00-6.00 - 0.25 301 0.15 2 0.045 0.03 1 16.00 – 18.00 6.00 – 8.00 - 0.1 304 0.08 2 0.045 0.03 1 18.00 – 20.00 8.00- 10.50 - 0.1 - 304L 0.03 2 0.045 0.03 1 18.00 – 20.00 8.00- 12.00 - 0.1 - 310S 0.08 2 0.045 0.03 1.5 ...
  • 301، 304، 304L، 316، 316L، 309 S، 310، 321 بار الفولاذ المقاوم للصدأ

    301، 304، 304L، 316، 316L، 309 S، 310، 321 بار الفولاذ المقاوم للصدأ

      Specification Grade 301 ,304 ,304L ,316 ,316L ,309 S,310 ,321 Standard ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165, BS 1449, DIN17460, DIN 17441 Diameter As customers requirement Length 1000mm-8000mm or as customers’ request Surface finish NO1,No.4,2B, BA, 6K, 8K, Hair Line with PVC Chemical Composition Grade C Si Mn P≤ S≤ Cr Mo Ni Other 301 ≤0.15 ≤1.00 ≤2.00 0.045 0.03 16-18 - 6.0 - 304 ≤0.07 ≤1.00 ≤2.00 0.035 0.03 17-19 - 8.0 - 304L ≤0.075 ≤1.00 ≤2...